Insert New Group Member - ABB i-bus EIB Product Manual

®
ABB i-bus EIB / KNX

3.4.11.1 Insert new group member

© 2006 ABB STOTZ-KONTAKT GmbH
Commissioning
Fig. 176: Dialog window: "Insert new group member"
To insert a group member, select Groups, 01: Beginning of instruction and
Members in the selection area.
The associated table is activated in the right-hand window.
The table is divided into GA No., GA Name, Type, Value, Range and SoC.
The meaning of the individual columns is as follows:
GA No.
The number of the group address is the unique identifier of a group address.
GA Name
The name of the group address is displayed here.
Type
The type indicates which type of values a telegram with this group address
can send.
Value
The value which is transmitted when triggering the group with this group
address is displayed under Value.
187