®
ABB i-bus
EIB / KNX
© 2006 ABB STOTZ-KONTAKT GmbH
Commissioning
Select an existing group address e.g. group address 00/00/001. The dialog
window Link group address is activated in the following way:
- by double-clicking on the selected group address or
- by pressing the right mouse button and selecting Edit in the pop-up menu.
Fig. 217:
Parameter window: "Select group address""
Note:
This dialog window can only be opened if the group address
has already been assigned a specific use e.g. activating a day
routine. The group address is thus assigned to a
communication object via priority control.
Communication object: X
The communication object number is automatically assigned as a
consecutive number by the application program Times Groups/2.
as switching time in Day routine no. 01
The text displayed here describes the assignment of the selected group
address e.g. to the switching time and day routine.
Group address
Options:
existing group address /
new group address
An existing group address can be assigned in the selection list.
The parameter is divided into Type, Name and No. The table can be
arranged and sorted as required.
The meaning of the individual columns is as follows:
224