Planning And Application; Context-Sensitive "Help" File - ABB i-bus EIB Product Manual

®
ABB i-bus EIB / KNX
4 Planning and
application
4.1 Context-sensitive "Help"
file
© 2006 ABB STOTZ-KONTAKT GmbH

Planning and application

This section contains some practical tips for using the Application Unit Time.
The context-sensitive "Help" file gives you the necessary information for
each step when parameterising the application program Times Groups/2.
The context-sensitive "Help" file is retrieved in the following way:
- press the Help button in the dialog window,
- press the right mouse button in the table area to select Help,
- press F1 on the keyboard or
- press the Help button on the toolbar.
The best way of working with the application program and the "Help" file is to
proceed as follows:
First start ETS3 and open the project which you wish to edit. Minimise the
main ETS3 window and move it to the top right-hand corner.
After starting the application program, minimise the window and move it to
the right edge of the screen so that about a third of the screen width remains
free. Now retrieve the "Help" file and minimise and position the window in the
free area on the left-hand edge of the screen.
You can now see the relevant "Help" page for each step on the left-hand
side if you retrieve the context-sensitive "Help" file to obtain information. You
can receive further explanations about the green, underlined terms by
clicking on them. You return to the previous "Help" page via the "Back"
button.
244