05-3_control systems(082~141)
Control Systems
3
Integrated management system
3
3-2. S-NET3 (MST-P3P)
Statistics and analysis
➊
Indoor unit status
Able to see the operation status of selected indoor units and indoor temperature for the present
•
and the past.
•
Able to refer to the operation status for the last two days. If the reference day is out of range, an error
message window will appear.
❷
Power consumption of indoor units
•
Displays the use time and power consumption ratios for the indoor units connected to each DMS.
V-124
3/6/08 14:04
Page 124
Select indoor unit.
DMS selection
Hourly indoor unit operation and
temperature display.
Display errors if the wrong period
has been set.
Period reference
Use time and power consumption
ratio display.