Samsung DVM PLUS III Technical Data Book page 581

05-2_control systems(046~081)
Operation display
➊
When I/M is connected to F1/F2 (Outdoor unit)
Power input
❷
When I/M is connected to R1/R2 (Centralized controller)
a) If centralized controller K4 switch is ON (Low speed)
Indoor unit
main address
During tracking with centralized controller
b) If centralized controller K4 switch is OFF (High speed)
During tracking
with centralized controller
Tracking completed
Error display
➊
Communication error between outdoor unit
❷
Communication error between centralized controller
❈ When E1 and E2 errors occur together, E1 is displayed first.
3/6/08 14:02 Page 49
➔ ➔
Outdoor unit During tracking
detection
I/M address
❈ During tracking
- 2 : During tracking (Centralized controller K3 is ON : Room tracking)
- 3 : During tracking (Centralized controller K3 is OFF : Group tracking)
- G : It appears when the tracking mode is changed
❈ Display after tracking completed
- U : Centralized controller calls I/M itself.
- d : Centralized controller calls other I/Ms
- c : Centralized controller sends control command
↔
❈ Display all indoor unit
➔
main addresses alternatively at the left segment
(for all indoor units with K2 to OFF)
Tracking completed
➔
Indoor unit
main address
Tracking completed
↔
Interface module or indoor units
↔
Interface module
Indoor unit
RMC address
Interface module
V-49