Network Page Definitions; Table 10: Network Page Definitions - Grandstream Networks GRP2612 Administration Manual

MosIq
Warning Threshold for
Delay
Critical Threshold for
Delay
Display Report
Display Report on Web
UI
Display Report on LCD
Custom Display
Layout on LCD

Network Page Definitions

Network → Basic Settings
Internet Protocol
IPv4 Address
IPv4 Address
Host name (Option 12)
DHCP Vendor Class ID
(Option 60)
PPPoE Account ID
PPPoE Password
PPPoE Service Name
Ipv4 Address
Subnet Mask
Gateway
DNS Server 1
DNS Server 2
Preferred DNS Server
IPv6 Address
by 10. The threshold value of MOS-LQ causes the phone to send a critical
alert quality report to the central report collector.
Configure the threshold value of one way delay (in milliseconds) that causes
the phone to send a warning alert quality report to the central report collector.
Configure the threshold value of one way delay (in milliseconds) that causes
the phone to send a warning alert quality report to the central report collector.
When enabled, phone will display quality report on WEB UI.
When enabled, phone will display quality report on LCD.
When enabled, phone will display quality report on LCD.

Table 10: Network Page Definitions

Selects Prefer Ipv4 or Prefer Ipv6. The default setting is "Prefer Ipv4".
Allows users to configure the appropriate network settings on the phone to
obtain Ipv4 address. Users could select "DHCP", "Static IP" or "PPPoE". By
default, it is set to "DHCP".
Specifies the name of the client. This field is optional but may be required by
some Internet Service Providers.
Used by clients and servers to exchange vendor class ID.
The default setting is "Grandstream GRP2612" for GRP2612, "Grandstream
GRP2612P" for GRP2612P, "Grandstream GRP2612W" for GRP2612W,
"Grandstream GRP2613" for GRP2613 and "Grandstream GRP2614" for
GRP2614.
Enter the PPPoE account ID.
Enter the PPPoE Password.
Enter the PPPoE Service Name.
Enter the IP address when static IP is used.
Enter the Subnet Mask when static IP is used for IPv4.
Enter the Default Gateway when static IP is used for IPv4.
Enter the DNS Server 1 when static IP is used for IPv4.
Enter the DNS Server 2 when static IP is used for IPv4.
Enters the Preferred DNS Server for Ipv4.
GRP26XX Administration Guide
P a g e |
73