Grandstream Networks GRP2612 Administration Manual page 31

SIP User ID
Authenticate ID
Authenticate
Password
Name
Voice Mail User ID
Picture
Account Display
Account x → Dial Plan
Name
Rule
Type
Account x → Network Settings
DNS Mode
User account information provided by your VoIP service provider (ITSP). It's
usually in the form of digits like phone number or actually a phone number.
SIP service subscriber's Authenticate ID used for authentication.
It can be identical to or different from the SIP User ID.
The account password required for the phone to authenticate with the ITSP
(SIP) server before the account can be registered.
After it is saved, this will appear as hidden for security purpose.
The SIP server subscriber's name (optional) that will be used for Caller ID
display.
This parameter allows you to access voice messages by pressing the
MESSAGE button on the phone. This ID is usually the VM portal access
number. For example, in UCM6xxx IPPBX, *97 could be used.
Specifies account's picture that will be sent to the caller/callee when making
calls.
This option allows you to configure how your SIP account label will be
displayed on the phone's screen.
If set to "User Name", LCD account label will display the Account Name
configured for this SIP account. If set to "User ID", it will then display the SIP
User ID configured for this SIP account.
Enter the name for the configured rules.
Enter the rule settings (number pattern, prefix to add ...etc).
Choose the type of the rule (pattern, block, dial now, prefix & second tone).
This parameter controls how the Search Appliance looks up IP addresses
for hostnames.
There are four modes: A Record, SRV, NATPTR/SRV, Use Configured IP.
The default setting is "A Record".
If the user wishes to locate the server by DNS SRV, the user may select
"SRV" or "NATPTR/SRV".
If "Use Configured IP" is selected, please fill in the three fields below:
•
Primary IP:
•
Backup IP 1;
•
Backup IP 2.
If SIP server is configured as domain name, phone will not send DNS query,
but use "Primary IP" or "Backup IP x" to send SIP message if at least one of
them are not empty.
GRP26XX Administration Guide
P a g e |
31