Destination
Notification
Settings → Preferences → Audio Control
Headset Key Mode
•
Terminated Call
•
Idle to Busy
•
Busy to Idle
•
Open DND
•
Close DND
•
Open Forward
•
Close Forward
•
Open Unconditional Forward
•
Close Unconditional Forward
•
Open Busy Forward
•
Close Busy Forward
•
Open No Answer Forward
•
Close No Answer Forward
•
Blind Transfer
•
Attended Transfer
•
Transfer Finished
•
Transfer Failed
•
Hold Call
•
UnHold Call
•
Mute Call
•
IP Change
•
Auto-Provision Finish
Up to 10 destinations can be configured here. For detailed instruction for this
part, please refer to: [OUTBOUND NOTIFICATION SUPPORT] Section in
this Administration Guide.
Specifies the message body of the notification for each event that can be
customized with embedded dynamic attributes.
For more details, refer to [OUTBOUND NOTIFICATION SUPPORT] section
in this Administration Guide.
When headset is connected to the phone, users could use the HEADSET
button in "Default Mode" or "Toggle Headset/Speaker".
1. Default Mode:
➢ When the phone is in idle, press HEADSET button to off hook the
phone and make calls by using headset. Headset icon will display
on the screen in dialing/talking status.
➢ When there is an incoming call, press HEADSET button to pick up
the call using headset.
➢ When there is an active call using headset, press HEADSET button
GRP26XX Administration Guide
P a g e
|
55