Packet Capture; Figure 5: Packet Capture In Idle; Figure 6: Packet Capture When Running - Grandstream Networks GRP2612 Administration Manual

PACKET CAPTURE

GRP2612/GRP2612P/GRP2612W/GRP2613/GRP2614 is embedded with packet capture function on
firmware 1.0.4.10 or greater. The related options are under Maintenance→Packet Capture.

Figure 5: Packet Capture in Idle

User can also define whether RTP packets will be captured or not from With RTP Packets option.
When the capture configuration is set, press Start button to start packet capture. The Status will become
RUNNING while capturing, as showed in Figure 6: Packet Capture when running. Press Stop button to
end capture.
Press Download button to download capture file to local PC. The capture file is in .pcap format.

Figure 6: Packet Capture when running

P a g e |
92
GRP26XX Administration Guide