Grandstream Networks GRP2612 Administration Manual page 65

Similar to Speed Dial but it will dial based on the current active account.
For example, if the phone is offhook and account 2 is active, it will call
the configured Speed Dial number using account 2.
•
Dial DTMF
Enter a series of DTMF digits in the Value field to be dialed during the
call. "Enable MPK Sending DTMF" has to be set to "Yes" first.
•
Voice Mail
Select Account and enter the Voice Mail access number in the Value
field.
•
Call Return
The last answered calls can be dialed out by using Call Return. The
Value field should be left blank. Also, this option is not binding to the
account and the call will be returned based on the account with the last
answered call.
•
Transfer
Select Account, and enter the number in the Value field to be transferred
(blind transfer) during the call.
•
Call Park
Select Account, and enter the call park extension in the Value field to
park /pick up the call.
•
Monitored Call Park
Select account from Account field, and enter the call park extension in
the Value field to park/pick up the call, and also monitor the parked call
via Line Key's light.
•
Intercom
Select Account, and enter the extension number in the Value field to do
the intercom.
•
LDAP Search
This option is to narrow the LDAP search scope. Enter the LDAP search
base in the Description field. It could be the same or different from the
Base in LDAP configuration under Advanced Settings.
The Base in LDAP configuration will be used if the Description field is
left blank.
Enter the LDAP Name/Number filter in the Value field.
GRP26XX Administration Guide
P a g e |
65