Grandstream Networks GRP2612 Administration Manual page 60

Message Waiting
Ring Back Tone
Call-Waiting Tone
Call-Waiting Tone Gain
Busy Tone
Reorder Tone
Speaker Ring Volume
Lock Volume
Notification Tone
Volume
Default Ringtone
Settings → Programmable Keys
Virtual Multi-Purpose
Keys Settings
Syntax: f1=val,f2=val[,c=on1/off1[-on2/off2[-on3/off3]]];
(Frequencies are in Hz and cadence on and off are in 10ms)
ON is the period of ringing ("On time" in 'ms') while OFF is the period of
silence.
In order to set a continuous ring, OFF should be zero. Otherwise it will ring
ON ms and a pause of OFF ms and then repeat the pattern. Up to three
cadences are supported.
Configures speaker ring volume. The valid range is 0 to 7.
The default setting is 5.
Allows to lock the ring tone volume. When enabled, the ring volume cannot
be changed from phone LCD.
Default setting is Disabled.
Configures notification tone volume. The valid range is 0 to 7 and default
setting is 5.
Allows to set Default Ringtone as their Global ringtone.
Note: The ring tone set in individual accounts have higher priority to this
setting. If the user wants the default ring tone to be used globally, he needs
to set the ring tone of each account to Default Ring Tone; Otherwise, it will
be whichever the ring tone you set.
Important: The Priority goes as: Contact Ring Tone → Account Ring Tone
→ Default Ring Tone.
•
Show Label Background
If enabled, the VPK label's background will match the status of the VPK
and will no longer be transparent
•
Use Long Label
If enabled, the VPK label will extend as far as possible.
•
Key Mode
If set to "Line Mode", the amount of VPKs will be the amount of lines you
can have. If set to "Account Mode", the lines will be grouped by account,
so the VPKs could hold more lines in one account.
For example, with line mode, when the line is in use, by pressing the
VPK, nothing is going to happen. In Account Mode, when the line is in
use, by pressing the VPK, a new line will be initiated.
•
Transfer Mode via VPK
Allows users to configure "Transfer" VPK to do either Blind or Attended
Transfer. They can also set their Transfer key to make a new call with
GRP26XX Administration Guide
P a g e |
60