Grandstream Networks GRP2612 Administration Manual page 83

Enable User Web
Access
HTTP Web Port
HTTPS Web Port
Disable SSH
SSH Public Key
Web/Keypad/Restrict
mode Lockout
Duration
Web Session Timeout
Web Access Attempt
Limit
Maintenance → Security Settings→ Trusted CA Certificates
Trusted CA Certificates
Maintenance→Security Settings→ Keypad Lock
Enable Keypad
Locking
Keypad Lock Type
Password to
Lock/Unlock
Keypad Lock Timer
Emergency
Maintenance → Packet Capture
Administrator can disable or enable user web access. Default is Enabled.
Configures the HTTP port under the HTTP web access mode.
Configures the HTTPS port under the HTTPS web access mode. Default
setting is "443".
Disables SSH access.
The default setting is "No".
This option allows you to use authentication keys for SSH access. The public
key should be loaded to phone's web UI while the private key should be
used in the SSH tool side.
Note: This will allow upcoming SSH access without password.
Specifies the time in minutes that the web or LCD login interface will be
locked out to user after five login failures. This lockout time is used for web
login, STAR keypad unlock, and LCD restrict mode admin login. Range is 0-
60 minutes.
Configures timer to logout web session during idle. Default is 10 min. Range
is 2-60 min.
Configures attempt limit before lockout. Default is 5. Range is 1-10.
Allows to upload and delete the CA Certificate file to phone.
Note: Users can either upload the file directly from web or they can choose
to provision it from their cfg.xml file.
If set to "Yes" the keypad can be locked either manually by pressing for 4
seconds * key or pressing a VPK/MPK which set to "keypad lock" mode,
also the keypad will be locked automatically after the configured timer.
If set to "Functional Keys" then only functional keys will be locked and users
still are allowed to dial configured emergency numbers.
Set the password to Unlock the keypad.
Configure the idle screen timer after which the keypad will be automatically
locked.
Enter list of allowed emergency numbers when keypad is locked (separate
the numbers with ",".
GRP26XX Administration Guide
P a g e |
83