Grandstream Networks GRP2612 Administration Manual page 70

Call Screen Softkeys
For example: If users set MPK 1 as "LDAP Search" for "Account 1", and
set filters:
Description -> ou=video,ou=SZ,dc=grandstream,dc=com
Value -> sn=Li
Since the Base
"dc=70randstream,dc=com", "ou=video,ou=SZ" is added to narrow the
LDAP search scope. "sn=Li" is the example to filter the last name.
•
Call Log
Select Account and enter account number in the Value field to access to
the Call Log of that selected account.
•
Menu
Select this feature in order to display the Menu from the MPK buttons,
no field dis required for configuration.
•
Information
Select this feature in order to display the Information popup to show the
firmware version, MAC address, IP address and IP Settings from the
MPK buttons, no field dis required for configuration.
•
Message
Select this feature in order to display the Message menu from the MPK
buttons, no field dis required for configuration
Assigns a function to the corresponding Call Screen Softkeys.
•
Speed Dial
Select the Account to dial from. And enter the Speed Dial number in the
Value field to be dialed.
•
Speed Dial via active account
Similar to Speed Dial but it will dial based on the current active account.
For example, if the phone is offhook and account 2 is active, it will call
the configured Speed Dial number using account 2.
•
Dial DTMF
Enter a series of DTMF digits in the Value field to be dialed during the
call. "Enable MPK Sending DTMF" has to be set to "Yes" first.
•
Voice Mail
Select Account & enter the Voice Mail access number in the Value field.
•
Call Return
The last answered calls can be dialed out by using Call Return.
GRP26XX Administration Guide
for LDAP server configuration is
P a g e |
70