Network Page Definitions; Table 10: Network Page Definitions - Grandstream Networks GXP2130 Administration Manual

Settings  Broadsoft  Broadsoft IM&P
LogIn Credentials
Broadsoft IM&P
Associated Broadsoft Account
Auto Login
Display Non XMPP Contacts

NETWORK PAGE DEFINITIONS

Network  Basic Settings
Internet Protocol
IPv4 Address Type
DHCP Host name
(Option 12)
DHCP Vendor Class ID
(Option 60)
PPPoE Account ID
GXP2130/GXP2140/GXP2160
FIRMWARE VERSION 1.0.5.18
features on the phone. If keep the Name box blank, the phone
will use the default name "Incoming" for it.

Server
Broadsoft IM&P server address. Usually not necessary to
configure and can already be found in the Broadsoft IM&P
username.

Port
Port for the Broadsoft IM&P server. Default port is 5222.

Username
Broadsoft IM&P username, not the Broadsoft account username.

Password
Broadsoft IM&P password, not the Broadsoft account password.
Enables Broadsoft Instant Message and Presence feature. The default
setting is "Disabled".
Specifies the associated account. User could choose each account on
the phone.
Choose to whether or not login to the Broadsoft IM&P account at
boot-up. The default setting is "No".
Choose whether or not to display non-xmpp contacts associated with the
Broadsoft IM&P user. Non-xmpp contacts will not display a presence or
status message. The default setting is "No".

Table 10: Network Page Definitions

Selects Prefer IPv4 or Prefer IPv6. The default setting is "Prefer IPv4".
Allows users to configure the appropriate network settings on the phone to
obtain IPv4 address. Users could select "DHCP", "Static IP" or "PPPoE". By
default, it is set to "DHCP".
Specifies the name of the client. This field is optional but may be required by
some Internet Service Providers.
Used by clients and servers to exchange vendor class ID. The default setting
is "Grandstream
GXP2160".
Enter the PPPoE account ID.
GXP2130/GXP2140/GXP2160
ADMINISTRATION GUIDE
GXP2130"/"Grandstream GXP2140"/"Grandstream
Page 54 of 87