Grandstream Networks GRP2612 Administration Manual page 72

Self-defined city code
Update Interval
Degree Unit
Settings → XML Application
Server Path
Softkey Label
Default Background
Color
Block Call Screen
Settings → Voice Monitoring
Session Report
VQ RTCP-XR Session
Report
Interval Report
VQ RTCP-XR Interval
Report
VQ RTCP-XR Interval
Report Period
Alert Report
Warning Threshold for
MosIq
Critical Threshold for
Enter the zip code or the name of the city you want to show its weather
information on the screen.
Note: By entering only the name of the city, the phone is going to choose
the best match; for this reason, the city being displayed would have been
mistaken.
Example: in the case of entering "Dallas", the phone will not be able to know
if the user means "Dallas, TX", "Dallas, NC" or "Dallas, Scotland", and it will
select by default "Dallas, TX". It is better to specify than the name of the
state/Country in the case of similar city names.
Specifies weather update interval (in minutes). Default value is 15 minutes.
Specifies the degree unit for the weather information to display on the phone.
User could choose Fahrenheit, Celsius, or Auto to display the degree unit.
The default setting is "Auto".
Configures the server path to download the idle screen XML file. This field
could be IP address or URL, with up to 256 characters.
Specifies the Softkey name displayed on the idle screen for the users to
enter XML application.
The default Softkey Label is "XMLApp".
Enters a color to use in HEX format. Default will be transparent.
E.g. #000000. Reference:
Permits to block auto-switching to call screen when XML application is
running. Default is disabled.
When enabled, phone will send a session quality report to the central report
collector at the end of each call.
When enabled, phone will send an interval quality report to the central report
collector periodically throughout a call.
Configure the interval (in seconds) of phone sending an interval quality
report to the central report collector periodically throughout a call. Default is
20 seconds.
Configure the threshold value of listening MOS score (MOS-LQ) multiplied
by 10. The threshold value of MOS-LQ causes the phone to send a warning
alert quality report to the central report collector.
Configure the threshold value of listening MOS score (MOS-LQ) multiplied
GRP26XX Administration Guide
http://htmlcolorcodes.com
P a g e |
72