Command List (cont)
UUT_SEND
Parameter:
Special Case Character string sent to a UUT must
UUT_SENDB
Parameter:
UUT_SET
Parameters: One or more of the following, in any
1. (Integer) Number of data bytes
being returned (excluding the
count)
2. (Integer) Data from the UUT serial
port as series of comma
separated integers
end in a carriage return (CR) or line
feed (LF) command or both
Data to the UUT serial port as series
of comma separated integers
order:
1. 300, 600, 1200, 2400, 4800, or
9600 (baud rate)
2. XON, RTS, or NOSTALL (stall
method)
4. DBIT7 or DBIT8 (number of data
bits)
5. SBIT1 or SBIT2 (number of stop
bits)
6. PNONE, PEVEN, or PODD
(parity)
41