Fluke 5520A Programmer's Manual page 38

Command List (cont)
RTD_TYPE
Parameter:
RTD_TYPE?
Responses:
RTD_TYPE_D
Parameter:
RTD_TYPE_D?
Response:
SP_SET
Parameters: One or more of the following,:
PT385, PT385_200, PT385_500,
PT385_1K, PT3926, PT3916, CU10,
or NI120
(Character) PT385, PT385_200,
PT385_500, PT385_1K, PT3926,
PT3916, CU10, or NI120
PT385, PT385_200, PT385_500,
PT385_1K, PT3926, PT3916, CU10,
or NI120
(Character) PT385, PT385_200,
PT385_500, PT385_1K, PT3926,
PT3916, CU10, or NI120
1. 300, 600, 1200, 2400, 4800, or
6000 (baud rate)
2. TERM or COMP (TERM sets the
remote port to expect a human
operator using a terminal and
COMP sets the report port to
expect a computer program
controlling the 5520A)
3. XON, RTS, or NOSTALL (stall
method)
4. DBIT7 or DBIT8 (number of data
bits)
5. SBIT1 or SBIT2 (number of stop
bits)
6. PNONE, PEVEN, or PODD
(parity)
7. CR, LF, CRLF (end-of-line)
36