External Connection Commands - Fluke 5520A Programmer's Manual

Command Summary (cont)

External Connection Commands

CUR_POST
CUR_POST?
EARTH
EARTH?
EXTGUARD
EXTGUARD?
LOWS
LOWS?
RTD_TYPE
RTD_TYPE?
TC_REF
TC_REF?
TC_TYPE
TC_TYPE?
TSENS_TYPE
TSENS_TYPE?
Selects terminals for current
output.
Returns terminals for current
output.
Selects earth ground is isolated
or tied.
Returns earth ground isolated
or tied.
Connects or disconnects the
internal guard shield from the
LO binding post.
Returns whether the internal
guard shields are connected
or disconnected from earth
(chasis) ground.
Selects low terminals open or
tied.
Returns low terminals open or
tied.
Sets RTD sensor type.
Returns RTD sensor type.
Sets internal/external reference
value.
Returns TC reference value.
Sets TC sensor type.
Returns TC sensor type.
Sets temperature sensor type.
Returns temperature sensor
type.
15