Fluke 5520A Programmer's Manual page 19

Command Summary (cont)
Oscilloscope Commands (cont)
TLIMIT_D?
TMWAVE
TMWAVE?
TRIG
TRIG?
VAL?
VIDEOFMT
VIDEOFMT?
VIDEOMARK
VIDEOMARK?
ZERO_MEAS
ZERO_MEAS?
Returns the power-up and reset
default for the time limit for
-SC600 OVERLD mode to stay
in operate.
Selects the waveform for
MARKER mode.
Returns the timemark waveform
setting for MARKER mode.
Sets the frequency of the signal
at the TRIG OUT BNC.
Returns the frequency of the
signal at the TRIG OUT BNC.
Returns the last thermocouple,
pressure, or, for the -SC600,
impedance measurement value.
Selects the format for VIDEO
mode.
Returns the VIDEO mode format.
Sets the VIDEO mode line
marker location.
Returns the VIDEO mode line
marker location.
Zeros the pressure module or
sets the zero offset for
capacitance measurement using
the -SC600.
Returns the zero offset for the
pressure module or capacitance
measurement using the -SC600.
17