Command Summary; Common Commands - Fluke 5520A Programmer's Manual

Command Summary

Common Commands

*CLS
*ESE
*ESE?
*ESR?
*IDN?
*OPC
*OPC?
*OPT?
*PUD
*PUD?
*RST
*SRE
*SRE?
*STB?
*TRG
*TST?
*WAI
Clears ESR, ISCR0, ISCR1, error
queue, RQS, and terminates
pending *OPC or *OPC?
Loads ESE register.
Returns ESE contents.
Returns ESR contents.
Returns instrument identification.
Sets OPC bit in ESR to 1 when
device operations are complete.
Returns 1 after operations are done.
Returns hardware/software
options.
Stores a string in nonvolatile
memory.
Returns contents of *PUD
memory.
Resets to power-up state.
Loads SRE register.
Returns SRE contents.
Returns the status byte.
Triggers a measurement return
value.
Initiates self test; return 0 for
pass.
Waits until commands are
executed.
13