Fluke 5520A Programmer's Manual page 35

Command List (cont)
OUT?
Parameters: (Optional) Units of returned
Responses:
OUT_ERR?
Responses:
PHASE
Parameter:
PHASE?
Response:
POWER?
Response:
amplitudes:
ac voltage mode (V or DBM)
RTD mode (CEL, FAR, or OHM)
TC output mode (CEL, FAR, or V)
1. (Float) Output amplitude
2. (Character) Units (V, DBM, A,
OHM, F, CEL, or FAR)
3. (Float) Second output amplitude
for dual output functions (0 if no
second amplitude)
4. (Character) Units of second
amplitude (0 if no second
amplitude)
5. (Float) Frequency (0 if dc,
resistance, capacitance, or
temperature)
1. (Float) UUT error magnitude
2. (Character) Units for the above
number (PPM, PCT, DB, or 0)
Phase with optional multiplier and
DEG unit
(Float) Phase in degrees
(Float) Power in ac or dc power
mode
33