Status Commands - Fluke 5520A Programmer's Manual

Command Summary (cont)
Setup and Utility Commands (cont)
TEMP_STD
TEMP_STD?
UNCERT?

Status Commands

ERR?
EXPLAIN?
FAULT?
ISCE
ISCE?
ISCE0
ISCE0?
ISCE1
ISCE1?
ISCR?
ISCR0?
ISCR1?
ISR?
Sets temperature standard.
Returns temperature standard.
Retums specified uncertainties
for the present output. If there
are no specifications for an
output, returns zero.
Returns first error code and
explanation in queue and
removes it from the queue.
Explains an error code.
Returns first error code in queue
and removes it from the queue.
Loads bytes into ISCE0 and
ISCE1.
Returns ISCE0 and ISCE1
contents.
Loads two bytes into ISCE0.
Returns contents of ISCE0.
Loads two bytes into ISCE1.
Returns contents of ISCE1.
Returns contents of
ISCR0/ISCR1.
Returns and clears ISCR0.
Returns and clears ISCR1.
Returns contents of ISR register.
24