Olympus EVIS LUCERA TJF 260V Reprocessing Manual page 44

Chapter 3 Cleaning, Disinfection and Sterilization Procedures
Aspirating detergent solution into the instrument channel and
the suction channels
40
5.
Reprocess the cleaning brushes as described in Section 3.9, "Cleaning,
disinfection and sterilization procedures for reusable parts and reprocessing
equipment".
6.
Remove the endoscope from the detergent solution.
1.
Attach the suction cleaning adapter to the instrument channel port (see
Figures 3.25 and 3.26).
2.
Connect the suction tube from the suction pump to the suction connector on
the endoscope connector. Turn the suction pump ON.
3.
Immerse both the endoscope's distal end and the weighted end of the
suction cleaning adapter in the detergent solution.
4.
Cover the suction cylinder with your finger and aspirate detergent solution
for approximately 30 seconds.
5.
Release your finger from the suction cylinder.
6.
Turn the suction pump OFF.
7.
Disconnect the suction tube and the suction cleaning adapter.
8.
Reprocess the suction cleaning adapter as described in Section 3.9,
"Cleaning, disinfection and sterilization procedures for reusable parts and
reprocessing equipment".
Figure 3.25
EVIS LUCERA JF/TJF TYPE 260V REPROCESSING MANUAL
Suction cleaning
adapter
Weighted end