Olympus EVIS LUCERA TJF 260V Reprocessing Manual page 21

 Channel-opening cleaning brush (MH-507)
The channel-opening cleaning brush is used to brush the external surfaces of
the distal end of the endoscope, the suction cylinder and the instrument channel
port (see Figure 3.6).
Brush
Figure 3.6
 Washing tube (MH-974)
The washing tube is used to inject detergent solution, disinfectant solution, water
and alcohol into the elevator wire channel and to flush air through the channel to
expel fluids (see Figure 3.7).
Figure 3.7
EVIS LUCERA JF/TJF TYPE 260V REPROCESSING MANUAL
Chapter 3 Cleaning, Disinfection and Sterilization Procedures
Shaft
Luer port
Connecting end
Brush handle
17