Olympus EVIS LUCERA TJF 260V Reprocessing Manual page 20

Chapter 3 Cleaning, Disinfection and Sterilization Procedures
16
 Injection tube (MH-946)
The injection tube is used to inject detergent solution, disinfectant solution, water
and alcohol into the air/water and suction channels and to flush air through the
channels to expel fluids (see Figure 3.4).
Notice card
Suction
channel port
Air/water
channel port
Suction port
(including the filter mesh)
Figure 3.4
 Channel cleaning brush (BW-20T)
The channel cleaning brush is used to brush the inside of the instrument and
suction channels and the interior and/or openings of the suction valve, air/water
valves, AW channel cleaning adapter and biopsy valve (see Figure 3.5).
Metal tip
Brush head
Figure 3.5
EVIS LUCERA JF/TJF TYPE 260V REPROCESSING MANUAL
Suction
channel tube
Filter tube
Shaft
Connector plug
Air pipe port
Air/water channel tube