De-Aeration Sequence; Language Settings; Boiler History; Error Logging - Slant/Fin VGH-299-CH Installation And Service Manual

12.2.4 D - S
E AERATION EQUENCE
The "De-Aeration" sequence is a safety function that starts at every power ON of the boiler and is used to remove
the air from the heat-exchanger. The DAir sequence does not start after a general reset (like the locking error
reset or 24 hours reset)
The display will show the following string during DAir sequence:
• "Dair Running"
• "Dair Error Water Pressure"
12.2.5 L
ANGUAGE SETTINGS
The display has a number of different language options, such as English, French, Chinese and Italian.
BE AWARE: DO NOT set the language to the Chinese Language if you are not familiar with this language. Contact
Slant/Fin for instructions if the display is set to Chinese and needs to be reset to another language.
Please follow the next steps, which describe how to set the display to a specific language:
1. From the Status Overview, press the MENU
2. Select "Settings" (press UP/DOWN ↑↓ to highlight/select) and press the CONFIRM
3. Select "General Settings" (press UP/DOWN ↑↓ to highlight/select) and press the CONFIRM
4. Select "Language" (press UP/DOWN ↑↓ to highlight/select) and press the CONFIRM
5. Select the desired language (press UP/DOWN ↑↓ to highlight/select) and press the CONFIRM
Language
English
Italiano
中文
INTERNATIONAL

Boiler history

The boiler history found in the information menu displays several history counters that keep track of the boiler
usage. The history cannot be erased and will continue for the burner controller life cycle. The following boiler
history data is available:
(Sub) Menu item Description
Successful Ignitions Number of successful ignitions.
Failed Ignitions Number of failed ignitions.
Flame Failures Number of flame failures (loss of flame).
Operation Days Number of days that the appliance is operational (powered ON).
CH Burner Hours Number of hours that the appliance has burned for Central Heating.
DHW Burner Hours Number of hours that the appliance has burned for Domestic Hot Water.

Error logging.

Error logging is available. This functionality is linked to the Real-Time Clock functionality.
Errors will be logged for a stand-alone system or for a complete cascade system (based on the cascade settings).
The PB display will monitor the error codes it receives from the boiler(s) and if an error code is a new error code
the error will be stored in the error log. An error will be logged with a (real-time clock) time stamp (date and time)
when the error was detected and a boiler ID of the boiler on which the error was detected.
The error log can be viewed from the error log menu, which is located in the information menu.
Menu
Domestic Hot Water (DHW)
Information
Settings
System test
Information
Boiler Status
Boiler History
Error Log
Service
button once
▼
Picture 12. 9
i
Picture 12.10
!
Picture 12.11
E93.1601EN032.C VGH installation manual
button
button
button
button
Table 12.4
67