Table of Contents
Advertisement
Vehicle Speed Sensor (VSS) Removal and
Installation
Removal
1) Disconnect negative cable at battery.
2) Disconnect VSS coupler (1).
3) Remove VSS (2).
Installation
1) Apply oil to new O-ring (1) and then install VSS to transaxle.
(1)
2) Connect VSS coupler (1).
3) Connect negative cable at battery.
MANUAL TRANSAXLE (M13 ENGINE) 7A2-11
- Quick Links:
- Table of Contents
- Engine Coolant Change
Hide quick links:
Advertisement
Chapters
Table of Contents
