Suzuki Wagon R Manual page 2717

0B-10 MAINTENANCE AND LUBRICATION
Engine Accessary Drive Belt Inspection
(Z13DT Engine)
WARNING:
All inspection and replacement are to be performed with
ENGINE NOT RUNNING.
Water pump and generator drive belt inspection
Inspect belt for cracks, cuts, deformation, wear, tension and
cleanliness referring to "Water Pump and Generator Drive Belt
Inspection" in Section 6B3. If any defect exists, replace.
Engine Accessary Drive Belt Replacement
(Z13DT Engine)
Water pump and generator drive belt replacement
Replace belt with new one referring to "Water Pump/Generator
Drive Belt Removal and Installation" in Section 6B3.
Camshaft Timing Belt Replacement (G10
Engine)
Replace belt with new one. Refer to Section 6A for replacement
procedure.
CAUTION:
• Do not bend or twist timing belt.
• Do not allow timing belt to come into contact with oil,
water, etc.
Valve Lash (Clearance) Inspection (M13
Engine)
1) Inspect intake and exhaust valve lash and adjust as neces-
sary.
Refer to "Valve Lash (Clearance) Inspection" in Section 6A2
for valve lash inspection and adjustment procedure.
1. Camshaft
2. Thickness gauge