Suzuki Wagon R Manual page 2728

2) Check inflating pressure of each tire and adjust pressure to
specification as necessary.
NOTE:
• Tire inflation pressure should be checked when tires
are cool.
• Specified tire inflation pressure should be found on
tire placard or in owner's manual which came with the
vehicle.
3) Rotate tires.
For details, refer to "Tire Rotation" in Section 3F.
Wheel Discs Inspection
Inspect each wheel disc for dents, distortion and cracks. A disc in
badly damaged condition must be replaced.
Wheel Bearing Inspection
1) Check front wheel bearing for wear, damage, abnormal
noise or rattles. For details, refer to "Wheel Disc, Nut and
Bearing Check" in Section 3D.
2) Check rear wheel bearing for wear, damage, abnormal noise
or rattles. For details, refer to "Wheel Disc, Nut and Bearing
Check" in Section 3E.
Suspension System Inspection
• Inspect front struts & rear shock absorbers for evidence of oil
leakage, dents or any other damage on sleeves; and inspect
anchor ends for deterioration.
Replace defective parts, if any.
• Check front and rear suspension systems for damaged,
loose or missing parts; also for parts showing signs of wear
or lack of lubrication.
Repair or replace defective parts, if any.
MAINTENANCE AND LUBRICATION 0B-21