Suzuki Wagon R Manual page 1973

4B-4 PROPELLER SHAFTS
2
3
1
2
4) If disassembling propeller shaft assembly is necessary,
1
5) Loosen center support bolts (1), then remove propeller shaft
5
1
4
6) Disconnect propeller shaft No.1 with center support and pro-
INSPECTION
• Inspect propeller shaft and flange yoke for damage.
• Inspect propeller shaft for runout.
Propeller shaft runout
Limit: 0.7 mm (0.028 in.)
loosen propeller shaft No.2 bolts (1) and viscous coupling
nuts (2) to facilitate subsequent disassembling, but keeping
each connection provisionally.
No.1 with center support (2), propeller shaft No.2 (3),
dynamic damper (5) and viscous coupling with center sup-
port (4) all together.
peller shaft No.2 from viscous coupling with center support
If damage is found or shaft runout exceeds its limit, replace.