Suzuki Wagon R Manual page 2813

3E-10 REAR SUSPENSION
2) Install wheel speed sensor lead wire clamp, if equipped.
3) Install parking brake cable clamp (1).
4) Install shock absorber (1) to rear axle (2).
5) Tighten shock absorber lower bolt (3) temporarily by hand.
6) Remove floor jack from rear axle.
7) Install wheel and tighten wheel bolts to specified torque.
Tightening torque
·
Wheel bolt (a): 95 N m (9.5 kg-m, 69.0 lb-ft)
8) Lower hoist and vehicle in non loaded condition, tighten trail-
ing arm front and rear nuts and shock absorber lower bolt to
specified torque.
Tightening torque
Trailing arm rear nut (b): 80 N
Trailing arm front nut (c): 90 N
Shock absorber lower bolt (d): 63 N
·
m (8.0 kg-m, 58.0 lb-ft)
·
m (9.0 kg-m, 65.0 lb-ft)
·
m (6.3 kg-m, 45.5 lb-ft)