Suzuki Wagon R Manual page 1877

0B-16 MAINTENANCE AND LUBRICATION
Wheel Discs Inspection
Inspect each wheel disc for dents, distortion and cracks. A disc in
badly damaged condition must be replaced.
Wheel Bearing Inspection
1) Check front wheel bearing for wear, damage, abnormal
noise or rattles. For details, refer to "Wheel Disc, Nut and
Bearing Check" in Section 3D.
2) Check rear wheel bearing for wear, damage, abnormal noise
or rattles. For details, refer to "Wheel Disc, Nut and Bearing
Check" in Section 3E.
Suspension System Inspection
• Inspect front struts & rear shock absorbers for evidence of oil
leakage, dents or any other damage on sleeves; and inspect
anchor ends for deterioration.
Replace defective parts, if any.
• Check front and rear suspension systems for damaged,
loose or missing parts; also for parts showing signs of wear
or lack of lubrication.
Repair or replace defective parts, if any.
• Check front suspension arm ball joint stud dust seals for
leakage, detachment, tear or any other damage.
Replace defective boot, if any.
Steering System Inspection
1) Check steering wheel for play and rattle, holding vehicle
straight on ground.
Steering wheel play
"a": 0 – 30 mm (0 – 1.1 in.)
2) Check bolts and nuts for tightness and retighten them as
necessary. Repair or replace defective parts, if any.