Suzuki Wagon R Manual page 2835

4A-2 FRONT DRIVE SHAFT (G10/M13 ENGINE MODELS)
Front Drive Shaft Assembly Construction
1. Transaxle
2. Drive shaft assembly
3. Tie-rod end
4. Suspension control arm
5. Stabilizer
6. Stabilizer mount bracket bolt
On-Vehicle Service
7. Oil filler/level plug
: Apply sealant 99000-31260 to plug thread
8. Oil drain plug
: Apply sealant 99000-31260 to plug thread
9. Tie-rod end nut
10. Ball stud bolt
11. Drive shaft nut
12. Wheel bolt
13. Drive shaft washer
14. Center bearing support
15. Center shaft
16. Center bearing support bolts
Do not reuse.
Tightening torque