Suzuki Wagon R Manual page 2766

4
1
2
3
Procedure After ECM Replacement (Z13DT
Engine Model)
Refer to "Procedure After ECM Replacement" under "ECM Regis-
tration" in Section 6E3.
A/C Condenser Assembly
CAUTION:
Be careful not to damage condenser fins. If condenser fin
is bent, straighten it by using flat head screwdriver or
pair of pliers.
Removal
Z13DT Engine Model
1) Disconnect negative (–) cable at battery.
2) Recover refrigerant from A/C system by referring to "Recov-
ery" in this section.
NOTE:
The amount of removed compressor oil must be mea-
sured for replenishing compressor oil.
3) Remove front bumper referring to "Front Bumper and Rear
Bumper" in Section 9.
4) Disconnect discharge hose (1) and liquid pipe (2) from con-
4
denser assembly (3).
5) Remove condenser bracket bolts (4).
6) Remove condenser assembly (3).
M13 and G10 Engine Models
Refer to the same section of the Service Manual mentioned in the
"FOREWORD" of this service manual.
AIR CONDITIONING (OPTIONAL) 1B-15