Suzuki Wagon R Manual page 2721

0B-14 MAINTENANCE AND LUBRICATION
[A]
SAE 0W-30, 0W-40
SAE 5W-30, 5W-40
C -30 -20 -10 0
F -22 -4 14 32
1
2
1
3
(a)
10 20 30 40
50 68 86 104
2
4) Install oil filter element.
a) Replace seal ring (1) of oil filter housing cover (3) with new
one and apply engine oil to seal ring.
b) Install new oil filter element (2) to cover.
c) Install oil filter housing cover with element.
Tightening torque
Oil filter housing cover (a): 25 N·m (2.5 kg-m) 18.5 lb-ft
5) Replenish oil until oil level is brought to FULL level mark on
dipstick. (about 3.2 liters (5.6 lmp pt.)) The filler inlet is by the
engine oil filter.
Use specified engine oil. Select the appropriate oil viscosity
according to the proper engine oil viscosity chart [A].
NOTE:
Note that the amount of oil required when actually chang-
ing oil may somewhat differ from the data depending on
various conditions (temperature, viscosity, etc.)
6) Check oil filter and drain plug for oil leakage.
7) Start engine and run it for 3 minutes. Stop it and wait 5 min-
utes before checking oil level. Add oil, as necessary, to bring
oil level to FULL level mark on dipstick.
1. Full level mark
2. Low level mark