Suzuki Wagon R Manual page 2203

6A2-36 ENGINE MECHANICAL (M13 ENGINE)
1
2
2
1
2
1
(a)
(b)
4
(b)
5
8) Remove water outlet cap (1) from timing chain cover (2).
9) Remove timing chain cover.
10) Remove oil gallery pipe No.1 (1) and oil control valve (2)
3
Installation
1) Clean sealing surface on timing chain cover, cylinder block
2) Install new O-ring (1) to oil control valve (2).
3) Install oil control valve to timing chain cover (3).
Tightening torque
Oil control valve mounting nut
(a): 11 N·m (1.1 kg-m, 8.0 lb-ft)
4) Install oil gallery pipe No.1 (4) with new copper washers (5)
Tightening torque
Oil gallery pipe No.1 bolt
(b): 30 N·m (3.0 kg-m, 21.5 lb-ft)
3
from timing chain cover (3).
and cylinder head.
Remove oil, old sealant and dust from sealing surface.
Tighten nuts to specification.
to timing chain cover.
Tighten bolts to specification.