Suzuki Wagon R Manual page 1907

3D-4 FRONT SUSPENSION
Stabilizer Bar and/or Bushings
Components
1. Split pin
2. Castle nut
3. Stabilizer bar washer
On-Vehicle Service
4. Stabilizer bar bushing 7. Mount bushing
5. Suspension control arm 8. Mount bush bracket
6. Stabilizer bar 9. Mount bracket bolt
Installation
For installation, reverse removal procedure, observing the follow-
ing instructions.
10. Paint mark
11. Paint mark (RH side)
• Install stabilizer bar (1) so that paint mark (2) on it comes to
the right side of vehicle.
• Align the outside edge (1) of mount bushing with the inside
edge (2) of paint as shown in figure.
Tightening torque
Do not reuse.