KE8900ST / KE9900ST
KE8900ST is used in the diagrams below.
1. Unscrew the screws from the side shown in the diagram below:
2. Use the screws from step 1 to screw the mounting bracket to the bottom of
the Transmitter as shown below:
3. Screw the mounting bracket to any convenient location on the rack.
Note: The KE8900ST / KE8900SR can be installed in the ATEN VE-RMK
1U Extender Rack Mount Kit. To purchase this kit contact your local
dealer.
M3 x 5
M3 x 5
Chapter 2. Hardware Setup
55