Video Wall - ATEN KE6900T User Manual

Video Wall

Creating a Video Wall allows you to create connections that combine Receiver
displays to form a large video wall. Use the options to group multiple Receivers
in the video wall. A video wall can contain multiple forms of single displays
and grouped displays in various layouts. Video Walls appear listed below
Receivers, on the Receivers settings page.
To create a Video Wall, in Receiver settings, click
Video Wall.
Select the number of displays and then group multiple displays to form large
screens and/or use single displays for independent screens to create the video
wall's layout. Click the bar -- under the display icon to select a Receiver for
each display. This configuration should match the actual video wall layout.
Item
Name
Description
Number of Displays
Bezel Dimension
Enter a name for the Video Wall.
Enter a description for the Video Wall.
Use the Horizontal and Vertical drop-down menus to
select the number of displays that make up the video wall
(a maximum of 64 are supported). Match this to the
physical layout of the displays. Click the refresh icon to
update the layout.
Use the two boxes to increase/decrease the frame size of
each active display.
Chapter 6. System Status
and then select Create
Description
181