Push Content - ATEN KE6900T User Manual

KVM over IP Matrix System User Manual

Push Content

Push Content allows you to push the Receiver's computer connection to
another Receiver's console, allowing both to access to the computer. Select the
Push Content tab and the following screen appears:
The Push Content Page components are described in the table, below:
No. Item
1 Receiver Name
2 Description
3 Connect
5 Next Arrow
6 Previous Arrow
128
Description
Lists the Receivers that can be selected to push the
local Receiver's computer connection to.
The field provides a description of the Receiver that
was entered when it was created.
Click Push Content to push the local Receiver's
computer connection to the selected Receiver's
console. The local Receiver's computer connection
will appear on the Receiver that it was pushed to and
both will share access to the computer. The access
mode selected at the local Receiver will determine
how access is shared (see Transmitter Permissions,
page 171 for details).
Use these two buttons to navigate to the next page
or to the end of the list if there are more choices
available than can be seen on the page.
Use these two buttons to navigate to the previous
page or to the beginning of the list if there are more
choices available than can be seen on the page.