Ke6900St (Transmitter) Front, Rear And Top View - ATEN KE6900T User Manual

KE6900ST (Transmitter) Front, Rear and Top View

Front View
1
Rear View
3
No. Component
1 Reset
2 KVM Port
3 RS-232 Port
4 LAN Port
5 Power Jack
2
4
5
This switch must be pushed with a thin object, such as
the end of a paper clip.

Press and release to reboot the device.

Power off, hold reset then power on the device
while pressing reset to recover from a firmware
upgrade failure.

Press and hold it in for more then three seconds
resets the unit back to its factory default settings.
The USB KVM cable supplied with the package that links
the Transmitter to the computer plugs into these ports.
This RS-232 serial port is for connecting to the computer
for serial control.
Note: When a LAN connection is detected serial
commands bypass the KE6900ST and are sent across
the network to the receiver. When no LAN connection is
detected serial commands are automatically directed to
the KE6900ST for local configuration and control.
The cable that connects the unit to the LAN plugs in
here.
The cable from the DC Power adapter connects here.
Top View
Description
Chapter 1. Introduction
6 7
29