Setup Cckm Server Ip Address On Windows - ATEN KE6900T User Manual

Setup CCKM Server IP address on Windows

1. Select Network and Sharing Center and click Change adapter settings.
2. Right-click Local Area Connection and select Properties.
3. In the Local Area Connection Properties window, highlight Internet
Protocol Version 4 (TCP/IPv4) then click Properties.
4. Select Use the following IP address and enter in the IP for the CCKM
server (e.g. any IP address not in use, and in between 192.168.0.2 and
192.168.0.253)*, Subnet Mask (e.g. 255.255.255.0), and Default Gateway
that corresponds with your network setup.
5. Click OK to change the CCKM server's IP address.
Note: Make sure the CCKM server's IP address is not a duplicate to prevent
IP address conflict.
To connect to the CCKM server via web browser, enter the CCKM IP address
and port number (default: 8443). For example, if the CCKM IP address is
192.168.0.10, then enter https://192.168.0.10: 8443.
If you have a 2nd NIC, please follow the following steps.
6. Select Network and Sharing Center and click Change adapter settings.
7. Right-click Local Area Connection for the 2nd NIC and select
Properties.
8. In the Local Area Connection Properties window, highlight Internet
Protocol Version 4 (TCP/IPv4) then click Properties.
9. Select Use the following IP address and enter in the IP of the 2nd subnet
for the CCKM server (e.g. any IP address not in use, and in between
192.168.1.2 and 192.168.1.253)*, Subnet Mask (e.g. 255.255.255.0), and
Default Gateway that corresponds with your network setup.
10. Click OK to change the CCKM server's IP address of the 2nd subnet.
Appendix
305