Receiver Group - ATEN KE6900T User Manual

KVM over IP Matrix System User Manual

Receiver Group

Creating a Receiver Group allows you to connect the video from multiple
transmitters to multiple Receiver displays. To use this feature, connect a
Transmitter Group (page 170) to a Receiver Group (see Instant Link,
page 149). Receiver Groups appear at the bottom of the Receiver settings page.
To create a Receiver Group, in Receiver settings, click
Create RX Group.
Fill in the appropriate information and then double-click or drag-and-drop
Receivers to add or remove them in the top panel. The Receivers in the top
panel will be used to view the video from the Transmitter Group. To connect a
Transmitter Group to a Receiver Group, see Instant Link
Item
Name
Description
Location
Boundless Switching
Save
Cancel
180
Enter a name for the Receiver Group.
Enter a description for the Receiver Group.
Use the drop-down menu to select a location for the
Receiver Group or leave it Unallocated. See Location,
page 160, for details.
Use the radio button to enable or disable Boundless
Switching. See Boundless Switching, page 183 for
details.
Click Save to save the changes.
Click Cancel to exit without saving.
and then select
, page 149
Description
.