Slim Version - ATEN KE6900T User Manual

KVM over IP Matrix System User Manual

Slim Version

The Properties tab allows you to configure the Receiver's settings:
Item
Mode
Properties
RS232 Settings
110
Select Extender mode for simple one-to-one (Transmitter to
Receiver) setups that are managed with the Receiver's OSD
menu.
Select Matrix mode to manage devices and connections from
the KE Matrix Manager web GUI. This mode is for advanced
administration of Transmitter to Receiver connections (see
Browser / Telnet Operation, page 143).
If you selected Extender mode (above) set the Transmitter IP
address for the Receiver's Video, Audio, USB, and RS232
source signals.
If you selected Matrix mode (above) the Properties will be
grayed out. Use Channels to configure the Transmitter
connections (see Browser / Telnet Operation, page 143).
Configure the serial device settings for the Receiver. The
default settings are:
Baud Rate: 9600
Parity: None
Data Bits: 8 bits
Stop bits: 1 bit
Flow Control: None
Description