Mute Command - ATEN KE6900T User Manual

Mute Command

The Mute command allows you to enable or disable the audio.
The formula for the Mute command is as follows:
Command + Output + Num1 + Control + [Enter]
1. For example, to turn mute off (audio on) for the Receiver, type the
following:
mute off [Enter]
2. For example, to turn mute on for Receiver (192.168.0.11), type the
following:
mute o192.168.0.11 on [Enter]
3. For example, to turn mute off for Receiver (192.168.0.18), type the
following:
mute o192.168.0.18 off [Enter]
The following tables show the possible values for the Mute commands:
Command
mute
Output
o
Num1
xx
Control
on
off
The following table lists the available Mute commands:
Command
mute
mute
Mute command
Output port command
Output number
xx: Receiver ID or IP address
Mute on; audio disabled
Mute off; audio enabled (default)
Output Num1
o xx
o xx
Chapter 12. CLI Commands
Description
Description
Description
Description
Control Description
on Turn mute on for output xx
xx: Receiver ID
off Turn mute off for output xx
xx: Receiver ID
241