Table of Contents
Advertisement
KE6910R / KE6912R (Receiver) Front View
No.
Component
1
Power LED
2
LAN LED
3
Local LED
4
Remote LED
5
Graphics Pushbutton
6
OSD Pushbutton
7
Video Pushbutton
8
USB Port
1
2
POWER
LAN
Graphics
OSD
5
Lights blue to indicate the unit is turned on.
This LED indicates the network status.
Lights when connected to the LAN and blinks when
the Ethernet connection is active:
Orange: 10 Mbps
Orange + Green: 100 Mbps
Green: 1000 Mbps
Off when not connected to the LAN.
Lights green to Indicate the Transmitter has KVM
access of the computer.
Lights green to Indicate the Receiver has KVM access
of the computer.
Sets the displays image quality to the highest possible
grade so that images are optimized. This toggle button
turns off the Video Pushbutton option.
Graphics mode is selected by default.
Use this pushbutton to open the OSD menu.
Sets the displays image quality to a grade that is
optimized for video playback. This toggle button turns
off the Graphics Pushbutton option.
Use this port for virtual media or a USB peripheral
device.
Note: 1. When using a USB disk plugged into this
port, see USB Mode, page 177.
2. This USB port does not support isochronous
endpoints, therefore USB peripherals that
stream audio or video data, such as
speakers or webcams, will not work.
3
4
REMOTE
LOCAL
Video
6
7
Description
Chapter 1. Introduction
8
19
Advertisement
Table of Contents
