Transmitter Group - ATEN KE6900T User Manual

KVM over IP Matrix System User Manual

Transmitter Group

Creating a Transmitter Group allows you to create a connection that sources
the video from multiple Transmitters to view at across multiple Receiver
displays. To use this feature, connect a Transmitter Group to a Receiver
Group (page 180). Transmitter Groups appear at the bottom of the Transmitter
settings page.
To create a Transmitter Group, in Transmitter settings click
select Create TX Group.
Fill in the appropriate information and then double-click or drag-and-drop
Transmitters to add or remove them in the top panel. The Transmitters in the
top panel will be used as the video source for the Receiver Group at the
Receiver.
Item
Name
Description
Location
Save
Cancel
170
Enter a name for the Transmitter Group.
Enter a description for the Transmitter Group.
Use the drop-down menu to select a location for the
Transmitter Group or leave it Unallocated. See Location,
page 160, for details.
Click Save to save the changes.
Click Cancel to exit without saving.
Description
and then