Authentication & Authorization - ATEN KE6900T User Manual

Authentication & Authorization
 RADIUS Settings
To allow authentication and authorization through a RADIUS server, do
the following:
1. Check Enable.
2. Fill in the IP addresses and service port of the Preferred RADIUS
Server and Alternate RADIUS Server.
3. In the Timeout field, set the time in seconds that the KE Manager waits
for a RADIUS server reply before it times out.
4. In the Retries field, set the number of allowed retries.
5. In the Shared Secret field, key in the character string that you want to
use for authentication between the KE Manager and the RADIUS
Server. A minimum of 6 characters is required.
6. On the RADIUS server, Users can be authenticated with any of the
following methods:
 Use the same Username on both the RADIUS server and the KE
Manager.
 Use the same Group name on both the RADIUS server and the
KE Manager.
 Use the same Username/Group name on both the RADIUS server
and the KE Manager.
In each case, the user's access rights are the ones assigned that were
assigned when the User or Group was created on the KE Manager.
 LDAP / AD Settings:
Chapter 7. System Settings
207