Clearances - Siemens SIMOTION C230-2 Equipment Manual

4.1.2

Clearances

Rules
If you comply with the minimum clearances, you will:
S Ensure heat is dissipated from the modules
S Provide space to fit and remove modules
S Provide space to lay wiring
S Increase the mounting height of the rack to 205 mm
To guarantee the functionality, clearances of 40 mm must be maintained.
Note
If you use a shield connecting element (see Section 6.3), the dimensions stated
are measured from the lower edge of the shield connecting element.
Clearances
Fig. 4-2 shows the clearances between the individual racks and the clearance to
adjacent equipment, cable ducts, cabinet walls, etc.
20
mm
Fig. 4-2
E Siemens AG, 2003 All rights reserved
SIMOTION C230-2, 04.2003 Edition
40 mm
40 mm
             Â
40 mm
40 mm
Clearances
Installation
205 mm
+ a
a
20
mm
4-59