Siemens SIMOTION C230-2 Equipment Manual page 2

Safety notices
This manual contains notices that you should observe to ensure your own personal safety, as well as to
protect the product and connected equipment. These notices are highlighted in the manual by a warning
triangle and are marked as follows according to the level of danger:
Danger
!
Indicates a potentially hazardous situation which, if not avoided, will result in death or serious injury or in
substantial property damage.
Warning
!
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury or
in substantial property damage.
Caution
!
Used with the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injury or in property damage.
Caution
Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may
result in property damage.
Notice
Used without the safety alert symbol indicates a potential situation which, if not avoided, may result in an
undesirable result or state.
Qualified personnel
This device/system may only be set up and operated by qualified personnel. Qualified persons are de-
fined as persons who are authorized to commission, to ground, and to tag circuits, equipment, and
systems in accordance with established safety practices and standards.
Correct usage
Note the following:
Warning
!
This device and its components may only be used for the applications described in the catalog or the
technical descriptions and only in connection with devices or components from other manufacturers that
have been approved or recommended by Siemens.
This product can only function correctly and safely if it is transported, stored, set up, and installed cor-
rectly, and operated and maintained as recommended.
Trademarks
SIMATICR, SIMATIC HMIR, SIMATIC NETR, and SIMOTIONR are registered trademarks of
SIEMENS AG.
Other names in this publication might be trademarks the use of which by a third party for his own purposes
may violate the rights of the registered holder.
E Siemens AG, 2003 All rights reserved
The reproduction, transmission, or use of this document or its contents is not
permitted without express written authority. Offenders will be liable for
damages. All rights, including rights created by patent grant or registration of
a utility model or design, are reserved.
Siemens AG
Automation & Drives
Motion Control Systems
P.O. Box 3180, D-91050 Erlangen
Germany
-2
Siemens Aktiengesellschaft
Disclaimer of liability
We have checked the contents of this manual for agreement with the hard-
ware and software described. Because deviations cannot be precluded en-
tirely, we cannot guarantee full agreement. However, the data in this manual
are reviewed regularly, and any necessary corrections are included in subse-
quent editions. Suggestions for improvement are welcomed.
E Siemens AG, 2003
E Siemens AG, 2003 All rights reserved
Subject to technical changes.
SIMOTION C230-2, 04.2003 Edition
SIMOTION C230-2